Quested ZS-2
2 Channel power amplifier 300W per ch
יצרן | |
---|---|
סדרה | |
פורמט |
ASK AN EXPERT
המומחים המוכשרים שלנו מוכנים לעזור!
תמיכה טכנית
כל מה שצריך לחוויה מושלמת!
משלוחים
צרו איתנו קשר למשלוח לכל חלקי הארץ!
הכירו את ה-ZS-2
מפרט טכני
Features
AP800
Power Rating | 450 W into 8 ohms 770 W into 4 ohms |
Damping Factor | 400 @ 8 ohms 1 kHz |
Input Sensitivity | +7 dBm |
Input Impedance | 10 kOhms |
Gain | 33 dB |
Frequency Response | 20 Hz to 20 kHz |
Signal to Noise Ratio | Not specified by manufacturer |
Total Harmonic Distortion (THD) | 0.005% |
Input Connections | 3-pin XLR |
Output Connectors | Shrouded Binding Posts: 4 mm |
Controls Front Panel | On/Off, rotary potentiometers, mute |
Controls Rear Panel | 2/4 or 4/8 switch, stereo or bridged switch |
Indicators | Peak meters, mute, fault/DC & limit, bridged, power, temperature |
Cooling | Temperature warnings and 2 fans to assist |
Power Consumption | Not specified by manufacturer |
Power Requirements | 230 VAC @ 10 A max 120 VAC @ 20 A max |
Dimensions | 19 x 1.75 x 15″ (48.2 x 8.8 x 38.1cm) |
Weight | 51 lbs (23kg) |
SM-748
Filter Type | Bessel/Butterworth/Linkwitz-Riley 12-24-48 dB/8ve Bessel/Butterworth 18 dB/8ve |
Operating Modes | Input: 2/4 Output: 4/6/8 |
Crossover Frequencies | Parametric EQ (8 per Input / 9 per Output): Gain: +15 dB to -30 dB in 0.1 db steps Frequency: 19.7 Hz to 32 kHz, 136 octave steps Q/BW: 0.4 to 128 / 2.5 to 0.008 (Sections can be switched to shelving response)
High and Low-pass Filters (1 of each per output): |
Gain Range | Input: +6 dB to -40 dB in 0.1 dB steps Output: +15 dB to -40 dB in 0.1 dB steps and mute |
Front Panel Switches | 12 x Mute buttons 12 x Channel edit buttons 6 x Utility buttons 3 x Rotary encoders |
Inputs | Analog: 4 x XLRf Digital: Not specified by manufacturer |
Outputs | Analog: 8 x XLRm Digital: Not specified by manufacturer |
Maximum Input Level | Not specified by manufacturer |
Maximum Output | +20 dBm into 600 ohms |
Frequency Response | 20 Hz to 20 kHz, +1/2dB (-3dB @ 32kHz) |
Dynamic Range | >116 dB, 20 Hz to 20 kHz unweighted |
Noise | Not specified by manufacturer |
Display | 2 x 24 character LCD 2 x 6 point input and 8 x6 point output meters |
Dimensions | 19 x 11.8 x 1.75″ (482 x 300 x 45mm) |
Weight | 7.3 lbs (3.3 kg) |
Specialties | Program limiter and look-ahead “D-Max” limiter per output
Program Limiter: D-Max Limiter:
|
AP1300
Power Rating | Watts RMS per channel 16 ohms: 400 8 ohms: 750 4 ohms: 1250 3 ohms: 1600 2 ohms: 1800 |
Damping Factor | 1 kHz, 8 ohms |
Input Sensitivity | 80 dB |
Input Impedance | 10 kOhms |
Gain | 33 dB |
Frequency Response | 20 Hz to 20 kHz |
Signal to Noise Ratio | Not specified by manufacturer |
Total Harmonic Distortion (THD) | 0.008% |
Input Connectors | 3-pin XLR |
Output Connectors | Shrouded Binding Posts: 4 mm |
Controls Front Panel | Level controls, mute, link switch, signal limiters, temperature |
Controls Rear Panel | 2 ohm and bridged LEDs |
Indicators | Level indicators, fault indicators, clip warning, 2 ohms, and bridged LEDs |
Cooling | Cooling fans and temperature controls |
Power Consumption | Not specified by manufacturer |
Power Requirements | 230 VAC @ 20.0 A max 120 VAC @ 38.0 A max |
Dimensions | 18.9 x 5.1 x 18.1″ (48 x 13 x 46cm) |
Weight | 70.5 lbs (32kg) |